Draw From Clear Lake Water:
BoatMister Misting sytem can draw CLEAR Lake Water from a stationary position so there is no need to worry about running out of water. Drop Red Inlet Line with Weighted Screened anchor into the lake. {Note: System should NOT be used with salt water}

Use Water Container:
We offer a 7- Gallon Hard Plastic container OR a 5-Gallon Folding Collapsable Container. Both Containers have attachments that hook up directly to Red inlet line.

Fill up water Containers with water (ICE). Take off weighted anchor from Red inlet. Screw Line directly to Water container. Put container on its side with water valve on bottom.
{Note: Our Misting nozzles flow at 1 gallon per hour, so the more nozzles you use the quicker you run out of water}.

Tap Into Boats Onboard Water Source:
We have Tee Connectors that slice right into boat on-board water Lines. Find water supply line from galley pump to Sink/ Shower, cut line and Use our Quick Connector fittings to Tee into our Red inlet line.

Connector 1> Water Line Reducing Tee: Connects 1/2” to 1/2” Tees into 1/4” red inlet line.
Connector2> Water Line Reducing Tee: Connects 15mm to 15mm Tees into 1/4” red inlet line.
Conncetor 3> Water Line With On/Off Valve Reducing Tee: Connects 1/2” to 1/2” Tees into 1/4” red inlet line.

Other ways to hook up to water:
* Drop Wieghted ancor Red inlet into holding tank of on-board water Source

* Use your own water container and drop in Red Inlet line

* Pontoon Boats Can use their water wells on back of boat.

Wake Board Ballast water source

***Ask about our Stable Barbed Hose fittings that work with our Tee connectors for Hooking up to Ballast Water Lines that go to Wake Board Boats. Insert plastic barbed fittings into Ballast water line going to Fat Sacs. Clamp on barbed fittings. Hook to 1/2 to 1/4 inch Tee connector for water source